How Much Pallet Racking Do I Need? A Worked Example
From a pallet count to bays, rows, uprights, beams and wire decks, with the arithmetic shown, and the three numbers that change the answer most.
Plain answers to the questions we get asked every week.
From a pallet count to bays, rows, uprights, beams and wire decks, with the arithmetic shown, and the three numbers that change the answer most.
The three dense pallet systems compared on density, FIFO, selectivity, forklift time, damage, cost per position and the inventory each one suits, with the cases where each wins.
When beams from one maker fit uprights from another, when they do not, how to check, and what an engineer needs before mixed rack goes under a load plaque.
The sequence for taking racking down, moving it and putting it back up: survey, drawings, permits at the new building, labeling, teardown order, transport, re-install, inspection, and what to replace rather than move.
Missing clips, unanchored frames, overloaded beams, damaged uprights still in service, no load plaques, blocked flues: the ten things we find most often and how to fix each one.
Selective, double-deep, drive-in, drive-through, push-back, pallet flow, shuttle, VNA, cantilever, pick modules, mezzanines and conveyors. What each one is, how it works, and when to choose it. With a working 3D model of every system.
Used rack can cost far less and ship sooner. New rack gives you exact sizes and a factory finish. Here is how to choose, and when to mix the two.
Both store pallets several deep and both save floor space. The difference is in how many products you carry and how you want your forklifts to work.
Adding to your racking or selling it? Four measurements for the upright and three for the beam tell a supplier everything they need to know.
Closing or moving a warehouse? Here is how selling the racking works, what a buyer needs from you, and how to keep it from holding up your move-out.
Try: uprights, push-back, 42 inch, pallet jack, permit